Search Results for “pocket holster”

In The Waistband (IWB)/Pocket Holster

REMORA Inside the Waistband (IWB)/Pocket Holster

Ambidextrous before customizations

Remora’s entire manufacturing process is unmatchable. The whole outer skin of the holster helps it “stick.” The holster’s outer skin is a rubberized non-slip fabric that holds like no other—the non-slip binding and inner padding assist in keeping the holster secure.
They all work together with a small amount of compression to ensure a smooth draw and re-holstering while keeping your holster where you placed it.

Remora holsters are waterproof, fire retardant, washable, lightweight, and durable.

MODIFICATION DESCRIPTIONS:

Artemis (ART) Cut: the holster is cut lower in the front to allow better access to the grip

Clip Options: The clips provide extra security depending on your attire. The 2in1 Clip snaps on or off, so the holster can be used with or without the clip. The 2in1 clip swivels and adjusts for cant. The Stationary Clip is a wide sturdy clip that slides through nylon webbing.

Attached Magazine Compartment: carries an extra magazine, speed strip, small flashlight, or knife.

The Sweat Shield protects you from “hammer gouges” and similar irritations. The Sweat Shield protects your weapon from body oils and sweat.

Full Sweat Shield: provides total coverage and prevents any contact with the firearm. The Full Sweat Shield protects against pistol gouge from hammers, beavertails, and rough grips.

Now able to accommodate Red Dot/RMRs/Small and large lasers and lights

The plush lining is a soft velour fabric

Product Care:

Cleaning Instructions:
1. Using a mild dish soap (Dawn or like soap), wash the exterior holster/product with a sponge or dishcloth
2. Rinse well with water removing excess soap.
3. Let the holster/product air dry completely before use.

Tip- Put a paper towel tube inside the holster after washing to help aid the drying process

The video demonstrations show how to conceal and the heat-fitment of your Remora.

PROUDLY MADE IN THE USA!

Learn more about our products and modification options on our PRODUCT INFO page.
LIKE us ON

Jet Pepper Gun Inside the Waistband (IWB)/Pocket Holster

SPECIALTY HOLSTER FOR THE JPX JET PROTECTOR PEPPER GUN

The plush lining is a soft velour fabric

Pepper Blaster Inside the Waistband (IWB)/Pocket Holster

Specialty holster made for the Kimber Pepper Blaster II.

MODIFICATION DESCRIPTIONS:

Artemis (ART) Cut: the holster is cut lower in the front to allow better access to the grip

The plush lining is a soft velour fabric

FREE HOLSTER with purchase*

They all work together with a small amount of compression to ensure a smooth draw and re-holstering while keeping your holster where you placed it.

Remora holsters are waterproof, fire retardant, washable, lightweight, and durable.

2024 TRIPLE TRIO-3 OF OUR BEST HOLSTERS

Modification options include all 3 holsters

Remora’s entire manufacturing process is unmatchable. The whole outer skin of the holster helps it “stick.” The holster’s outer skin is a rubberized non-slip fabric that holds like no other. The non-slip binding and inner padding assist in keeping the holster secure.
They all work together with a small amount of compression to ensure a smooth draw and re-holstering while keeping your holster where you placed it.

Remora holsters are waterproof, fire retardant, washable, lightweight, and durable.

Sweat Shield protects you from “hammer gouges” and similar irritations. Protects your weapon from body oils and sweat.

Full Sweat Shield: provides total coverage preventing any contact with the firearm. Protects against pistol gouge from hammers, beavertails, and rough grips.

Plush lining is a soft velour fabric

Outside The Waistband (OWB) Holster

REMORA Outside the Waistband (OWB) Holster for outside the waistband carry. The OWB holster can also be used for IWB or POCKET carry. The OWB holster features a full-sided Velcro flap that goes over the belt and allows the holster cant to be adjusted before securing the velcro.

Draw side specific
Inner padding provides comfort as well as retention for firearm
Non-slip binding
Smooth interior lining for a seamless draw
Marine-grade thread
Water-resistant/fire retardant / lightweight/durable
Velcro Restraints Straps: helps to keep the firearm secure and velcro comes undone when the firearm is drawn.

MODIFICATION DESCRIPTIONS:

Artemis (ART) Cut: the holster is cut lower in the front to allow better access to the grip

Now able to accommodate Red Dot/RMRs/Small and large lasers and lights

The plush lining is a soft velour fabric

Product Care:

Cleaning Instructions
*Products that have any of our four non-slip fabrics may be washed as needed to remove body oils and sweat from the material.*
1. Using mild dish soap (Dawn or like soap) gently wash the exterior holster with a sponge or dishcloth.
2. Rinse well with water and make sure all excess soap is removed.
3. Let the holster air dry completely before use.

Video Demonstration of our OWB holster:

Proudly

Learn more about our products and modification options on our PRODUCT INFO page.

Reinforced Top (RFT) Holster & Magazine Holder COMBO

REINFORCED TOP (RFT) INSIDE THE WAISTBAND (IWB)/POCKET HOLSTER & MAGAZINE HOLDER *COMBO*
Includes (1) IWB/Pocket holster and (1) holder.

Reinforced Top (RFT) holsters offer a unique design that allows you to safely, smoothly & securely one-handed re-holster draw after draw.

A single magazine compartment can accommodate a single stack .22 to a double stack .45 mag, speed strip, small flashlight, or knife.

Features:

Inner padding provides comfort as well as retention for firearm
Smooth interior lining for a seamless draw
Marine-grade thread
Water-resistant/fire retardant / lightweight/durable

MODIFICATION DESCRIPTIONS:

Artemis (ART) Cut: the holster is cut lower in the front to allow better access to the grip

The Sweat Shield protects you from “hammer gouges” and similar irritations. The Sweat Shield protects your weapon from body oils and sweat.

Holster able to accommodate small lasers and lights

The plush lining is a soft velour fabric

Product Care:

Cleaning Instructions:
1. Using a mild dish soap (Dawn or like soap) gently wash the exterior holster/product with a sponge or dishcloth
2. Rinse well with water and make sure excess soap is removed.
3. Let the holster/product air dry completely before use.

We offer a variety of clip and no clip holsters as well as a variety of magazine holders and accessories. SHOP the rest of our product line to learn more.

Holsters Styles

Inside the Waistband/Pocket Holster

The Original Non-Slip or Clip Concealment Product
The choice of many, NOT an imposter!
REMORA® offers a variety of holsters with different modifications that can be used for pocket & inside the waistband carry. Our IWB holsters accommodate all forms of concealed carry. Made in the USA with the highest quality of materials
IWB holsters start at $27.95

Micro Holsters

The Micro holster is the smallest low-profile concealment holster we offer. However, don’t let the size concern you, it stays in place and is easy to draw. The Micro holster is a draw side-specific holster that comes equipt with a swivel metal clip that adjusts to your preferred cant. Micro holsters start at $28.95

The open bottom of the Micro accommodates many different firearms with the same-like frame

Tuckable Holster

Our most popular options for those who carry IWB and wear dress shirts, polos, or their shirt tucked in. The holster comes with a detachable metal clip to aid in putting on the holster. The clip detaches depending on preference. The holster design faces outwards towards the waistband. A Velcro flap enables the user to tuck their shirt between the outside of the holster and the inside of the flap. The holster waistband side has a soft (loop) Velcro covering. The outside of the waistband flap is non-slip rubber, which prevents over-tucking. Tuckable Holsters start at $39.95

Outside the Waistband Holster

Remora’s Best-Kept Secret

The OWB holster features a full-sided Velcro flap that goes over the belt and allows you to cant the holster in the perfect position before securing the Velcro Flap. OWB holsters start at $39.95

The OWB (Outside the Waistband) Holster can also be used for IWB or Pocket carry.

Leg Holsters

THE REMORA ANKLE HOLSTER

Can be used for Ankle, Pocket, or IWB carry

The Remora Ankle Holster features an adjustable ankle and restraint strap. Remove the straps and replace them with the non-slip patch to convert the holster to IWB/pocket carry. Holster options include: sweat shield, calf and/or thigh modification

REMORA THIGH HOLSTER MODIFICATION

(Available in Right or Left Hand Draw Side)

The Remora Thigh Holster modification is an adjustable thigh and restraint strap. To convert to IWB/pocket holster remove the straps and replace them with the non-slip patch.

REMORA CALF HOLSTER MODIFICATION

A one-inch polyester strap wraps around the top of the calf. A vertical strap attaches to the ankle holster. Velcro holds them in place. The calf strap fits any REMORA Ankle Holster.

Outside the Waistband (OWB) Holsters

The draw-side-specific OWB holster has a smooth interior and a full-side Velcro flap. The inner padding provides comfort as well as retention for your firearm. It features marine-grade thread and non-slip binding. The OWB holster has the highest quality craftsmanship is water-resistant and fire retardant.

Holsters can be OWB, IWB, or pocket carry if used with our exclusive non-slip rubber outer skin.

Holsters made with the denier outer skin are for OWB carry only and available in a variety of colors.

The OWB holster attaches with a full-side Velcro flap that goes over the belt and allows the holster to cant.

A variety of different styles are available.